Pour small parts straight into a zip bag.

A short round neck and a wide flared mouth. Set the neck into the opening of a zip bag, then tip screws, nuts or beads from a jar into the wide mouth.

How it works

Hold the funnel with the neck inside the bag opening. Pour parts into the flared mouth and they slide down the neck into the bag.

Design features

• Short round neck sized for a zip bag opening

• Wide flared oval mouth with a tilted scoop edge for easy pouring

• Smooth rounded rim

• Overall size 124 x 92 x 58 mm

Colors

Shown in terracotta orange. This is a single-piece print; use any filament color you like.

Print setup

Suggested starting point: 0.2 mm layers, 3 perimeters, 20% infill. Adjust for your printer and material.

Build and use

Step 1. Print the funnel and clean the neck opening.

Step 2. Open a zip bag and set the neck inside it.

Step 3. Pour parts into the wide mouth.

Step 4. Lift the funnel out and seal the bag.